The Best Do It Yourself Garage Floor Epoxy Review

This fall I finally decided to give my garage floor the ultimate treatment. A heavy duty, commercial grade two part, three coat epoxy floor coating. This is the stuff that shines like glass and you see in a ferrari dealership.

At first I was going to purchase a DIY product that I had seen at a home show in Las Vegas called U Coat It. But right before I placed my order I found a website called www.garagejournal.com. I landed here by doing some k

eyword research about do it yourself garage epoxies. I'm sure the UCoatIt product is a good one, but after reading about a lot of other floors on that website's forum I decided to go with Woverine Coatings. This is a commercial grade, 100% solids epoxy product that is only available through a guy named Fred who posts on that website. Sounds sketchy, right?

Fred runs a company called www.AlphaGarage.com and the guys at Wolverine Coatings gave him the OK to sell direct to the DIY market. He was a great help and offered email and phone support to me during the entire process.

______________

The worst part about going after a project like this is emptying the garage. Unless you've just moved into your new home, chances are your garage is full of JUNK. You've not only got to clean all this junk up, but you've got to find a place to keep it for a month while you put the magic touches on your new garage floor. After you get it all cleaned out the concrete floor has to be properly prepped for the new epoxy coating. I did two separate acid etching sessions with plenty of pressure washing and sweeping. Once the floor was clean and rough to the touch, I filled my expansion joints with backer rod and a flexible sealant. After everything was dry and cured I began the epoxy process. First a bond coat, the next day the body coat and flake, followed by a clear coat on the third day. Each coat was applied with squeegee, a 18" nap roller, and spiked shoes so you can walk on top of the epoxy.